FAQS
WE ANSWER YOUR QUESTIONS
In a 40-foot container, it is possible to fit up to 20 IBCs.
It is recommended to use AC-11 granulometry. In case the pothole has a depth of over 5 cm, it is recommended to use AC-25 asphalt at the base and AC-11 at the top.
No, the presence of water is not an impediment at the time of application. However, if the pothole contains a large amount of water, it is recommended to drain a large part of it.
Asphalts made with Brunus KD-7 and Ambar KP-20 are applicable at temperatures below zero degrees Celsius.
Asphalts made with Brunus KD-7 or Ambar KP-20 have the same salt resistance as traditional hot asphalt.
To make one tonne of asphalt with Ambar KP-20, it will be necessary to add 30L of additive together with 970Kg of RAP. The percentage of usage will vary depending on the quality of the milled material.
In the case of using Brunus KD-7, it is recommended to deposit 30% of the total weight of bitumen used. If you normally use 50Kg of bitumen, you would use about 15L of Brunus KD-7 and 35Kg of bitumen. The percentage of usage will vary depending on the type of bitumen.